
Product display

- Detailed
A. Specification::
Galvanized sheet or coil is defined as a carbon steel sheet coated with zinc on both sides.
Continuous hot dipping is the main process used to produce galvanized sheet and coil. Generally speaking, the hot dip process consists of passing the steel through a bath of molten zinc. The result is a layer of zinc tightly adhering to the base metal through an iron-zinc bonding layer. Our hot-dipped galvanized products are manufactured to ASTM A653 specifications.
Galvanized Steel Coils |
|
Thickness |
0.15mm--2.0mm |
Width |
50--1250mm |
Zinc Coating |
40gsm—275gsm |
Spangle |
Big, small regular spangle and zero spangle |
Surface Treatment |
Chromate, Skin Pass, Passivity and Oiled(un-oiled) |
ID |
508mm or 610mm |
Coil Weight |
3--7 Metric Tons and as requirements |
B. Material Types for Galvanized Coil and Sheet Steel :
Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) – further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS)
C. Typical Applications for Galvanized Coil and Sheet:
Products include exterior building products, ductwork, HVAC products, flashing, electrical boxes and other electrical products, roofing, doors, sashes, automotive parts, appliances, commercial and residential steel framing, truss plates, metal building purlins, and any other products requiring a corrosion resistant material.
Previous:Galvanized sheet
Next:Nothing